M14 Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
15,169 Posts
There is nothing wrong with flat primers. When they flow into the surrounding groove, you have a problem.

Winchester used to make high quality nickeled primers, up to about 10 years ago. Some batches of the non-nickeled were so soft that they allowed bypass, essentially putting divots in the faces of bolts. Folks that didn't catch it in time had a circle of divots in the bolt face. Not just M14 bolts, but those of bolt action rifles as well.

As I recall, TonyBen found out the hard way.

I swore off Winchester primers at that point. There are better options.
 
1 - 4 of 4 Posts
Top