M14 Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
3,275 Posts
If you haven't already done so, I'd do a basic cleaning to remove the factory grease, and re-lube it with pretty much any flavor of 'gun grease' or 'automobile grease'.
Also be sure to clean the chamber with patches, etc.

Another thing is to hold the rifle quite 'solidly' when firing to reduce the amount of movement on recoil - that way the gas system does the best job of extract & eject.

Jay Kosta
Endwell NY USA
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top