M14 Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Does anyone know where i can find a lower cluster rail for a synthetic stock M1A. Im looking for one about 6-8 inches and goes on the lower portion of the stock so I can mount a bipod and a fore grip.

Thanks
 

·
Registered
Joined
·
362 Posts
Does anyone know where i can find a lower cluster rail for a synthetic stock M1A. Im looking for one about 6-8 inches and goes on the lower portion of the stock so I can mount a bipod and a fore grip.

Thanks
It can be done easily, but you'll need a dremel tool.

Get one of these:
http://cgi.ebay.com/11-HAND-GUARD-S...228?pt=LH_DefaultDomain_0&hash=item1e5f12db74

You can easily inlet the inside of the M1A stock so that the "mounting hardware" that is included can fit down in it. You'll probably want to lay down some epoxy to keep the mounting hardware in the stock, but it isn't strictly needed. Just make sure you don't go overboard with the dremel.

It's a bit longer than you want, but it includes everything you need, nothing you don't, and it's inexpensive. If you really want, you can always cut it down.
 
1 - 3 of 3 Posts
Top