M14 Forum banner

Building 12.5 Pistol!

2991 Views 62 Replies 10 Participants Last post by  14alot
Decided to build a 12.5 Pistol as something a little easier to carry in a truck or an around the house defense weapon.

Most that I saw at my LGS were expensive and did not have what I really wanted in the build.

I had a Tactical Machine Lower left from 3 I purchased at one time.

Faced the upper EXPO receiver, to get everything as straight as possible, removed about .005 to get square and flat face.

I show a pic of the upper on a flat mill vise with a square, this proves nothing for accuracy of course, but was just curious and in for the education.

Wood Gas Nickel Machine Cylinder
Automotive tire Bicycle part Wood Gas Rim
Bumper Wood Gas Screw Nut
Automotive tire Wood Bumper Automotive exterior Gas
See less See more
  • Like
Reactions: 2
1 - 1 of 63 Posts
1 - 1 of 63 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.