M14 Forum banner

Bassett scope mount arrived today

1091 Views 4 Replies 3 Participants Last post by  Eagle7840
I ordered the picatinny low mount for my Norinco M14 and it arrived in less than week. It took me less than a minute to install and torque. I'll be bringing in the M14 with scope mount into work Sat. to match ring heights to mount a Vortex Viper 6.5-20x50mm with a 30mm tube. http://www.sportsmansguide.com/product/index/vortex-6.5-20-x-50mm-viper-scope?a=1722825 I really like the glass on the Vortex Viper line and the 30mm tube.
  • Like
Reactions: 3
1 - 1 of 5 Posts
I got the same mount for my M1A and needed to do a bit of filing on it. Nothing extreme, there was a pinch point on the rear hand guard band. Called Bassett and that's what they recommended. They also told me that the only contact points on the mount are the bold, lans, and grooves. So check your mount out and make sure its not "rubbing" anywhere other than those points.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.