M14 Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
94 Posts
Discussion Starter · #1 ·
I have a cheap Norinco that the iron is all greyish green. I want to change this to black.
Does anyone have any experience with brownells bake on finish, or should I just find some one to reparkerize this black.
Thanks,

Sean
 

·
Registered
Joined
·
55 Posts
Brownells has a couple of different shades of their teflon/moly bake-on finish. I did the gas tube and butt plate on my CMP M1 with the dark grey/parkerizing finish a few years ago and it still looks like a nice park job.

I also did the bbl and action on a Ruger stainless 77/22, and it still looks good. If you've seen Ruger's stainless, it's pretty smooth and bright, and this stuff stuck to it fine.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top