M14 Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
9,056 Posts
Discussion Starter · #1 ·
I have a loose dovetail front sight on my mossy 500

What’s the best way to secure it well, but I want to be able to remove it and switch it out in the future.

Would blue loctite work on a dovetail or what will work properly?
 

·
Registered
Joined
·
9,056 Posts
Discussion Starter · #3 ·
Remove the sight from the base. Use a small punch to peen the underside of the sight dovetail, or the inside of the dovetail in the base (or both). This will give you a friction fit when reinstalling the sight into the base.
Peen it, got it.
It’s fairly loose. I can easily wiggle it out. Almost lost it today so I want to ensure it stays put.
 
1 - 3 of 3 Posts
Top