Armscorp Receivers ... Anybody Know ???
1 - 6 of 6 Posts
Joined
·
3,627 Posts
armscorp receivers
my hi-power buddy tell me that armscorp supposedly made a production run of forged receivers early on. all the later ones are investment cast. he wont use them as he shoot s slightly warmed over loads. builds his comp rifles with poly receivers.
my hi-power buddy tell me that armscorp supposedly made a production run of forged receivers early on. all the later ones are investment cast. he wont use them as he shoot s slightly warmed over loads. builds his comp rifles with poly receivers.
Joined
·
3,627 Posts
arscorp rec
there cast and the bolt gideway is changed so the bolt face cant smash into the rec or the rear of chamber i own one pre ban and its a aussum shooter ( non are FORGED form armscorp they were the first too use lugs front/rear )
there cast and the bolt gideway is changed so the bolt face cant smash into the rec or the rear of chamber i own one pre ban and its a aussum shooter ( non are FORGED form armscorp they were the first too use lugs front/rear )
Joined
·
439 Posts
armscorp
sixty harley mac:
hareley, i have to concurr with mac.
jack friese the owner of armscorp never built a forged reciever.
he had plans to do it until he weighed the cost of investment casting versis forging for the startup.
jack is a very close friend and we hang out together at the middletown gunshow.
its usually a very fun day with jack he is a real good guy and honest.
he sells only top notch stuff and its all gi issue no chinese junk from jack. his receivers are far better than sprungfield although they recieved some bad press from some unknowledgeable big mouths on some of these web sites.
if you have a problem with anything from jack he will more than make up for it and when the problem is fixed its fixed right. also his guns have consistantly shot in the high side in competition and have beat out springfield in the accuracy dept.
and yes its true he was first to lug his recievers. jeff
sixty harley mac:
hareley, i have to concurr with mac.
jack friese the owner of armscorp never built a forged reciever.
he had plans to do it until he weighed the cost of investment casting versis forging for the startup.
jack is a very close friend and we hang out together at the middletown gunshow.
its usually a very fun day with jack he is a real good guy and honest.
he sells only top notch stuff and its all gi issue no chinese junk from jack. his receivers are far better than sprungfield although they recieved some bad press from some unknowledgeable big mouths on some of these web sites.
if you have a problem with anything from jack he will more than make up for it and when the problem is fixed its fixed right. also his guns have consistantly shot in the high side in competition and have beat out springfield in the accuracy dept.
and yes its true he was first to lug his recievers. jeff
1 - 6 of 6 Posts
