Joined
·
507 Posts
I just got an early #18 mount with the split non-continuous rail.
I have tried attaching an Aimpoint 30mm low mount, type seen here: http://www.opticsplanet.net/aimpoint-sr-30-mm-x-wide-rings.html
as well as an arms #19 low dual mount.
On both the recoil bar of the detachable mount would not fit in between the grooves on the rail of the old #18 mount.
Is it possible that the #18 mount is out of spec in this area? I had a full rail mount, the more recent production style and no issues. So I'm curious if this is a mount issue, or if the old split mounts were made this way and only accept certain rings from back in the day.
Any help is appreciated.
I have tried attaching an Aimpoint 30mm low mount, type seen here: http://www.opticsplanet.net/aimpoint-sr-30-mm-x-wide-rings.html
as well as an arms #19 low dual mount.
On both the recoil bar of the detachable mount would not fit in between the grooves on the rail of the old #18 mount.
Is it possible that the #18 mount is out of spec in this area? I had a full rail mount, the more recent production style and no issues. So I'm curious if this is a mount issue, or if the old split mounts were made this way and only accept certain rings from back in the day.
Any help is appreciated.
