[Lone Gunman]

I'm going to replace the extractor on my M1A with a USGI one, I'm looking at the spring/plunger and have found a couple sources. Are they all pretty much the same?

How are these ones?
http://e-sarcoinc.com/m14extractorplungerandspring.aspx

https://www.standardpartsllc.com/productcart/pc/viewPrd.asp?idproduct=198&idcategory=31


Do I need to find a USGI one or would one of these do just fine?

 

[davecampperry]

Bill Ricca, New Tripoli, PA has the parts you need. I have dealt with Sarco pleasantly and successfully, before I started buying from Bill. Never heard of the other site. Bill is Authentic, you never have to worry about the quality, he's reasonable, if you can find it cheaper it's probably a chinese knockoff, and he is a member of the site so he is family. Good luck.

 

[mineralman55]

Bought some Garand spare parts from StandardpartsLLC recently. They were exactly as advertized. Shipped quickly and very nice.

 

[panther308]

Give Claude at RA Parts a look

 

[Lone Gunman]

Ended up getting a couple of PB marked extractors and the spring/plunger from StandardpartsLLC.com. After doing some research it seems the PB marked extractors are at least as good as USGI for about 3/4 of the cost.

 

[ArmyVet]

Give Claude at RA Parts a look

Agreed...

 

[Lone Gunman]

Give Claude at RA Parts a look

Agreed...

Yeah, the only reason I went with Standard Parts LLC was the convenience of being able to order and pay online. It also helped that I read here that the PB marked extractors are as good if not better than USGI. Thanks for the input guys, I bookmarked all the sites and will check them each time I need something.