M14 Forum banner

30-06 pull through reamer

885 views 2 replies 2 participants last post by  barnetmill 
#1 ·
Any one have a 30-06 pull through reamer they would trust me to borrow ? I would pay shipping both ways . I have the rod and a .308 reamer, need a 30-06. Would buy one used also. ....
 
#3 ·
Sometimes if the barrel of chromium surfaced, it can not be reamed. One needs to check for that first. I ran into that with a polytech M14s. I was changing out the chinese bolt for a TRW bolt. We ended up take a little off the bolt face with a special diamond tool. That way both bolts still work with that gun.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top