M14 Forum banner

30-06 pull through reamer

187 Views 2 Replies 2 Participants Last post by  barnetmill
Any one have a 30-06 pull through reamer they would trust me to borrow ? I would pay shipping both ways . I have the rod and a .308 reamer, need a 30-06. Would buy one used also. ....
1 - 3 of 3 Posts
Fellow member was gracious to allow me to use his, great group of fellow Gun enthusiast here !
  • Like
Reactions: 2
Sometimes if the barrel of chromium surfaced, it can not be reamed. One needs to check for that first. I ran into that with a polytech M14s. I was changing out the chinese bolt for a TRW bolt. We ended up take a little off the bolt face with a special diamond tool. That way both bolts still work with that gun.
1 - 3 of 3 Posts