M14 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. The M14
    Evening guys, At the range, a wicked breeze picked up and basically stirred up a sandstorm throughout the range. My M1A unfortunately got hit with the full brunt of it and was covered in sand/dust. The optic was easy enough to clean, and the stock/barrel was easily wiped down. But the action...
  2. The M14
    Hello! It’s my understanding that the Garand/M1A/M14 requires grease on some of it’s components in order to function properly and reduce excessive wear. In my experience, though, grease seems to attract small particulates and fine sand much more than a lightly oiled or even dry firearm would...
  3. Gunsmithing
    Hello everyone I am CLOS, this is my first post and first m1a Build FYI Newb at m1a I just finished putting together my trigger group and preformed all the function checks the assy guide says to do. I sourced all the parts from Fulton armory. the hammer has a part # of c46008-5 SA the...
1-3 of 3 Results