M14 Forum banner
m1a
1-20 of 182 Results
Advanced
  1. Stock
    Hi all Can the picatinny rail be removed and the hand guard on this rifle be replaced with a standard m1a handguard ex: Handguard, Fiberglass-Reinforced, New, Fulton Armory, with Retaining Clip Installed From what I can tell the answer is yes but would like to confirm. If if the hand guard...
  2. 20210716_160535.jpg

    M1A standard with Romeo 7 RDS and Ultimak hand guard.
  3. Want To Buy
    Looking for a Midwest Industries RMR mount for my M1A, the one that attaches to the barrel and allows co-witnessing with irons. I know its a long-shot as these are discontinued. would also settle for their aimpoint micro mount. Thanks!
  4. Accuracy
    Hi guys, I've been considering glass bedding my M1A that is currently sitting in a standard walnut stock from Springfield. I decided to let a gunsmith do it for me so I call one up and ask him for a quote on glass bedding. He asked if my stock had a metal liner in it. I was not sure what that...
  5. Gunsmithing
    Hi, New to the platform and new to the forum here. I was wondering whether anyone here with has 6.5 has run a shorter barrel than the standard 22". I prefer shorter barrels for maneuverability--both in terms of weight and getting through brush, etc., so I'm considering cutting my M1A in 6.5...
  6. Ammunition
    Anyone else tried this IMI stuff specifically? Stocking up for NJ. I don’t want to run dry and have to deal with the ammo purchasing while there. Got a decent deal on these, nothing 2021 crazy. Still reloading but it’s nice to have a few neat boxes for a rainy day. I’ve been pleased with IMI...
  7. Modern M14
    Hello All, I bought a Springfield Scout Squad and was looking at putting a sage chassis on it in the future, at the certified dealers it asks medium or heavy barrel and have searched around and can't find a definite answer to which it would be, I assume it would be a medium barrel and that heavy...
  8. Modern M14
    Good morning, I split my time at work between a feed truck and a saddle. For years I’ve had Winchesters, both 94 and 70, in circulation until seven years ago when my “girlfriend’s dad,” now my father-in-law, gifted me a Ruger Guide in ‘06. These made splendid truck guns, which I’ve come to...
  9. The M14
    Evening guys, At the range, a wicked breeze picked up and basically stirred up a sandstorm throughout the range. My M1A unfortunately got hit with the full brunt of it and was covered in sand/dust. The optic was easy enough to clean, and the stock/barrel was easily wiped down. But the action...
  10. Gunsmithing
    Hi, I originally wanted to buy an AR15 or a bullpup, but CA's AWB came out and I needed a rifle, so I bought a standard M1A for a very good deal for about $1,400. After a few years, I decided to work on the M1A and build it up with the Blackfeather RS chassis along with the LSP. I had a lot of...
  11. The M14
    I could go with a receiver mount but wanted to try the front rail system too. I have a picatinny extension in, and a cantilever mount for my crossfire II 2x7 scout scope. it feels sturdy enough, and my sight picture with my cheek riser is perfect. Want to hear other recommendations / advice
  12. Want To Buy
    Hello, I am looking to purchase a Delta-P Socom 16 Thread Adapter. I am looking to spend $125-$155. If possible. Adapter Thank you!
  13. The M14
    All, Background: I have recently inherited an M1A SOCOM 16 from my grandfather who recently passed away. I am looking at using this rifle for hog (this summer and fall) and deer hunting this season as well. I have plenty of experience with the M16/M4A1 platform and regular bolt action rifles...
  14. The SOCOM Rifle
    All, Background: I have recently inherited an M1A SOCOM 16 from my grandfather who recently passed away. I am looking at using this rifle for hog (this summer and fall) and deer hunting this season as well. I have plenty of experience with the M16/M4A1 platform and regular bolt action rifles...
  15. Ammunition
    Hi guys, I wanted to try out a range of different ammo for my M1A (LRB NM, medium weight, 1:10 twist, chrome moly, parkerized barrel). I was looking at some Federal Premium 125gr TRU, Fiocchi 150gr FMJ, and Federal Premium 175gr BTHP rounds. Can anyone tell me what results I should expect with...
  16. The SOCOM Rifle
    So before we get into the Why anyone would want to use the M1D style scope mount on an M1A, I want to get into the How can it mounted or is it possible? I’ve looked up everything I can about both the mount and the rifle and was easily able to find a repro mount and scope. The trouble I’m running...
  17. Want To Buy
    Hey Guys, I'm looking for a Sage M14ALCS chassis for my M1A and I can't seem to find one anywhere. I even reached out to Sage but its been months with no reply. Anyone know where I can find one or anyone selling a used one? Thanks
  18. Modern M14
    Hey Guys, I'm looking for a Sage M14ALCS chassis for my M1A and I can't seem to find one anywhere. I even reached out to Sage but its been months with no reply. Anyone know where I can find one or anyone selling a used one? Thanks
  19. PX
    Greetings all, If you are reading this I hope you and your loved ones are healthy and well. I have a new (old stock) M14/M1A laminate stock from Boyd's that I would like to swap, there are no other accessories included. I originally thought this was for a Garand but was mistaken. I would like...
1-20 of 182 Results
Top