General Information
Gun
armscorp m14
Make
Armscorp
Model
TFL M14
Caliber
.308
Barrel
heavy satern stainless steel NM barrel cut to 18.5"
Sight/Scope
Burris Signature HD 5-25x50, arms 22 rings, arms 18 split mount
Called "the little teapot" because it is short and stout, this gun is an accurate yet no frills working rifle that is the opposite of a safe queen. Built by Carl Leisinger.
The stock: A USGI fiberglass stock reinforced be an an anonymous forum member. The stock was reinforced with epoxied carbon fiber strips similar to the material used on teslas. This thing is almost as stiff as a mcmillan at a fraction of the weight. Front end clearance was done and ferrule was polished. Fits like a glove so bedding was not done. Sadlak rail installed.
Receiver: armscorp m14 TFL
Barrel: Satern heavy stainless NM barrel cut and crowned at 18.5 inches
Parts: Unitized (welded) GS, sadlak piston, USGI trigger with sadlak mag release, USGI op rod, Fulton Armory forged bolt with chrome firing pin, arms 18 split mount, burris signature hd 5-25x50 on arms 22 rings.
![]()
![]()
![]()
![]()
![]()
![]()
The stock: A USGI fiberglass stock reinforced be an an anonymous forum member. The stock was reinforced with epoxied carbon fiber strips similar to the material used on teslas. This thing is almost as stiff as a mcmillan at a fraction of the weight. Front end clearance was done and ferrule was polished. Fits like a glove so bedding was not done. Sadlak rail installed.
Receiver: armscorp m14 TFL
Barrel: Satern heavy stainless NM barrel cut and crowned at 18.5 inches
Parts: Unitized (welded) GS, sadlak piston, USGI trigger with sadlak mag release, USGI op rod, Fulton Armory forged bolt with chrome firing pin, arms 18 split mount, burris signature hd 5-25x50 on arms 22 rings.
Continue with Google
